Industrial Lubrication

Industrial Lubrication Castrol Gear Oils

Gear oils are vital to protecting all transmission systems whether you are looking for a smooth drive in your car or smooth performance from your machinery.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Alpha SP Mineral Mineral EP/AW 150-680 Provides basic lubrication & protection
Alphasyn T Full synthetic PAO AW 1420-460 High temperature, gear & bearings with non-EP performance
Alphasyn PG Full synthetic PAG EP/AW 220 Medium to high load worm gear & spur gear as well as bearing and circulating system
Optigear BM Mineral with MFT Mineral MFT 320-680 Spur & bevel gear units, under severe operating condition. Worm gear, rolling and sliding bearings, gear couplings and circulating system
Optigearsyn X Full synthetic with MFT PAO MFT 220-460 Industrial gear with wide temperature fluctuations, high loads, rolling & sliding bearings, wind turbines, conveyor belts, crane control, lift, rolling mill

Industrial Lubrication Castrol Hydraulic Oils

Castrol Hydraulic Oils prevents sludging and varnishing and provides long service life; Provides excellent corrosion resistance for internal surfaces from entrained air and moisture. Castrol hydraulic fluids cover a wide range of applications, from conventional mineral oils to synthetic & specialist oils.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Hyspin AWS Mineral hydraulics Mineral AW 32-150 Use in equipment which requires anti-wear oil
Hyspin AWH-M High VI hydraulics Mineral AW 32-68 Use in system requiring high & VI wide operating temperature
Hyspin HLP Ashless hydraulics Mineral Ashless sulphur phosphorus additive 32-150 Use in system where high oxidation stability and lubrication performance are required.

Industrial Lubrication Castrol Fire Resistant Hydraulics

Fire-resistant hydraulic fluids truly make their mark when a leak occurs in a high-temperature area. Hydraulic hoses and piping may fatigue and crack, allowing lubricant to spray out of them.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Anvol WG 46 HF-C type fire resistant hydraulic fluid Water glycol AW & corrosion
inhibitors
46 Applications include furnace doors, die-casting machines, forging machinery and mining equipment. It can be used in vane, gear or piston-type pumps with pressures up to 206.8 bar (3000psi)
Anvol SWX 46 HFDU synthetic type hydraulic fluid Polyol ester AW & corrosion
inhibitors
46 Formulated to work in high pressure hydraulic systems up to 7500psi

Industrial Lubrication Castrol Slideway Oil

Castrol Slideway Oil improve stick-slip resistance and metalworking fluid separation for enhanced lubrication of gibs, ball screws and bearings, the range is tested against industry and OEM specifications.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Magna SW Machine tool slideway oil Mineral EP/AW 32-220 Magna SW 32, Magna SW 68 & Magna SW 220 are commonly used in CNC machines on the railings

Industrial Lubrication Castrol Compressor Oils

Castrol Compressor Oil is fully synthetic ester based compressor oils which provides excellent thermal and oxidative stability leads to longer operating life and reduce lubricant costs.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Aircol PD Mineral compressor Mineral AW 32-100 Lubrication in rotors, bearings & gear in rotary compressors especially in oil flooded screw type bearing. Lubrication drain cycle up to 2000 hrs under normal use
Aircol SR
Full synthetic compressor PAO AW 46-68 Lubrication in rotary compressor with severe conditions or for normal operation with extended draining period

Industrial Lubrication Castrol Refrigeration Compressor Oil

Refrigeration Compressor oils designed to reduce heat and friction in rotary screw and reciprocating compressors. Suitable for hydraulic, air and gas compressors, from the smallest units to large multi-stage configurations, across a range of operating conditions.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Aircol AMS 68 Refrigeration Compressor lubricant Mineral R&O 68 Suitable for use with ammonia (NH3) as refrigerant

Industrial Lubrication Castrol Spindle Oil

Castrol Hyspin Spindle Oil has been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Hyspin Spindle Oil 10 Mineral without AW Mineral R&O 10 Designed for use in all types of spindle bearings, including precision machine tool bearings. It is free from anti-wear additives therefore, it is suitable for seal oil systems

Industrial Lubrication Castrol Turbine Oil

Castrol turbine oils are designed to meet the lubrication requirements of steam, gas and water turbines. Castrol's comprehensive range of turbine oils meets the needs of all types of turbines used for electric power generation and compressor drive applications.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Prefecto T Mineral turbine oil Mineral R&O 32-68 Conforms to BS 489/DIN 51515 Part 1

Industrial Lubrication Castrol Heat Transfer Oil

Castrol Heat Transfer Oils are formulated from very stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Castrol Heat Transfer Oils’ high viscosity index coupled with a low pour point offers excellent circulation during cold weather startups, eliminates heat from over heated pump motors, and protects against hot spots.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Perfecto HT 5 Mineral turbine oil Mineral N/A 32 Use in heat transfer system up to 300°C

Industrial Lubrication Castrol Quenching Oil

Castrol offers a range of quenching oils and fluids for various processes used in different industries. Castrol Quenching Oil provides consistent quenching performance and versatility for long service life and clean surfaces, virtually free from patches, spots and marbling.


PRODUCT NAME DESCRIPTION BASE OIL PERFORMANCE
ADDITIVES
ISOVG @ 40’C APPLICATION
Iloquench 32 Mineral Mineral Anti-oxidant 28 General purpose accelerated quenching oil ideal for quenching a wide range of steels, including lean alloy types
Iloquench 395 Refined paraffinic mineral Mineral Cooling rate
accelerators and surface conditioning additives
29 Combination of base oils and additives ensures brighter quenched components and free from the carboneous deposits

Industrial Lubrication Castrol Greases

Castrol Greases is a full-synthetic grease that protects your on-road equipment and extends service intervals. An extended-drain engine oil needs an extended-performance.


PRODUCT NAME THICKENER BASE OIL NLGI APPLICATION
TEMPERATURE
RANGE
PERFORMANCE
ADDITIVES
APPLICATION
Spheerol AP Lithium Mineral 3 -30°C to 105°C AW Multipurpose grease for general application
Spheerol EPL Lithium Mineral 0,2 -20°C to 120°C EP/AW Multipurpose grease with EP for general application
Molub Alloy (MA) 1000 HT Organic Sodium Synthetic 1 177°C to 288°C Solid lubricants/
EP
Application for minimum residue after evaporation and high VI for additional film strength at elevated temperatures
Braycote Inertox 2 PTFE Synthetic 2 -25ºC to 260ºC Solid lubricants For rolling and sliding bearings with extended re-lubrication intervals, high temperatures or under hostile ambient
Tribol GR 100 PD Lithium Mineral 00, 0, 1, 2 -35°C to 140°C MFT Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening/wood shaping machines and bearing surfaces of printing plates
Tribol GR 400 PD
Lithium Mineral 2 -30°C to 140°C MFT Difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range in highly loaded rolling and sliding bearings. For open gear wheels and worm gears at low speeds

Industrial Lubrication Castrol Soluble Coolants

Castrol’s high-performance soluble cutting oils are designed to help you reduce coolant use, pro long system life and meet your machining needs when working with a wide range of materials like aluminium, cast iron or other ferrous alloys.


PRODUCT NAME BASE DESCRIPTION CHLORINE EP RECOMMENDED
CONCENTRATION,
%
CAST IRON LOW-MEDIUM
ALLOYED STEEL
HIGH ALLOY
STAINLESS
STEEL
AL ALLOY YELLOW
METALS
Almaredge BI Mineral For single sump machines and large systems Free No 4-10 ✓✓ ✓✓
Alusol B Semi-synthetic Long coolant life & no bacterial smell Non-staining to most aluminum alloys Free No 4-12 ✓✓ ✓✓✓
Hysol MB 50 Semi-synthetic High performance soluble metalworking fluid which contains an additive package that may help to enhance machining performance and surface finish. It also provides excellent product stability which helps to lower the overall operational costs Free Yes 5-10 ✓✓ ✓✓ ✓✓ ✓✓
Syntilo 9930 Full synthetic Typically used in automotive industry (cast iron engine block and transmission, cam and crankshaft), refrigeration and
compressor industry and tube rolling/roll grinding
Free No 4-8 ✓✓ ✓✓
Syntilo 77 EF Full synthetic Low sticky, less aggressive to paints and superior corrosion protection in comparison to standard synthetic cutting fluids Free No 3-8 ✓✓ ✓✓ ✓✓ ✓✓

Industrial Lubrication Castrol Neat Oils

Castrol's world-class neat oils helps you increase productivity and performance, as well as maintain high surface-finish levels and dimensional accuracy.


PRODUCT NAME DESCRIPTION VISCOSITY
@40°C, CST
ESTER CHLORINE COPPER
STRIP TEST
ACTIVE SULPHUR INACTIVE SULPHUR
HEAVY METALS
Honilo 981 Designed for honing and superfinishing of ferrous and nonferrous metals. It can also be used for grinding applications, drilling and general machining of aluminium and yellow metals 4.8 Yes No 1b No No No
Ilocut 154 Designed for general machining of medium alloyed steel and non-ferrous metals 35 Yes No 1b No Yes No
Ilocut 334 Designed for general machining of medium alloyed steel and non-ferrous metals. Contains active sulphur and is not compatible with yellow metals 10 Yes No 4c Yes No No
Ilocut 480A Designed for general machining of cast iron, steel and nonferrous metals. It is especially recommended for use on small automatics, semi-automatics and multi-cut lathes 14 Yes No 1a No No No
Ilocut 603 Designed for broaching and gear hopping operations of ferrous alloys. This product contains active sulphur and
is not compatible with yellow metals
33 Yes No 4b Yes Yes No
Iloform PN 223 Specially formulated for use in light duty sheet stamping
operations where very low residues are required, in most cases eliminating the need for inter process cleaning
1.6 (20°C) Yes No 1a No No No
Iloform PN 224 CF
Specially formulated for use in light duty light stamping and
roll-forming operations where very low residues are required
1.0 Yes No 1a No No No

Industrial Lubrication Castrol Corrosion & Rust Protective

Castrol offers a comprehensive range of corrosion preventives that can help to achieve, desired level of corrosion protection on finished parts at economical cost, improved Health, safety and Environmental (HSE) performance, greater productivity through reduced scrap rates and waste.


PRODUCT NAME DESCRIPTION PERFORMANCE FILM TYPE FILM THICKNESS
(μm)
INDOOR PROTECTION
(months)
OUTDOOR PROTECTION
(months)
DRYING TIME
(mins)
Rustilo DWX 21 Short term protective oily film Oily 03 – 04 3 1 60
Rustilo DWX 22 Medium term protective oily film Soft greasy 3.5 – 4.0 12 6 120
Rustilo DWX 30 Medium term protective oily film Greasy 0.6 – 1 8 – 12 3 – 6 30